SecurePass™
      Back to home
      1. HealthSafe Help Center
      2. SecurePass™

      Easy Setup Guide: Configuring Your Android Tablet and Bluetooth Printer for SecurePass

      1. App Installation

      • Go to Google Play Store.
      • Search for "Health Safe - Secure Pass" app.
      • Tap "Install" to download and install the app.

      2. User Login and Permission Setup

      • Open the app and log in with your credentials.
        1) Login Screen
      • Grant all necessary permissions requested by the app to ensure full functionality.
        2) Permission Screen

      3. Printer Hardware Setup

      • Unpack the Bluetooth printer.

      • To ensure your printer is correctly configured, please follow these steps:

        1. Access the printer's settings menu.
        2. Navigate to 'Template Settings', then 'Template Mode'. Here, switch it to 'OFF'.
        3. Go to the 'Bluetooth' settings. First, ensure Bluetooth is enabled by setting it to 'ON'.
        4. Within the Bluetooth settings, find 'Automatic Reconnection' and activate it by selecting 'ON'.

        These steps will optimize your printer's functionality for seamless use.

      • Charge it fully using the provided cable.

      • Once the printer is configured correctly, the display screens should appear as shown below. It's important to note that the Bluetooth icon located at the top right corner will be blinking. This indicates that the Bluetooth connection is not yet established.
        3) Step 1 - Set up the Printer Hardware  

      4. Printer and Tablet Pairing

      • Turn on the printer and Android tablet.
      • Go to the tablet's Bluetooth settings.
        4) Step 2a - Setting an external device (Printer) in an Android Tablet
      • Find and select the printer to pair.
        5) Step 2a - Setting an external device (Printer) in an Android Tablet
        6) Step 2a - Setting an external device (Printer) in an Android Tablet
      • Once paired, confirm the connection in the app.
        7) Step 2a - Setting an external device (Printer) in an Android Tablet

      5. To connect the SecurePass Kiosk to the paired printer:

      • Initiate the connection process.
        8) Step 2b - Connecting SecurePass Kiosk to the printer paired
        9) Step 2b - Connecting SecurePass Kiosk to the printer paired
      • To access the admin screen, tap three times on the top left corner of the screen, specifically on the HealthSafe logo.
        10) Step 2b - Connecting SecurePass Kiosk to the printer paired
      • This action will prompt a password pop-up for admin screen access.
        11) Step 2b - Connecting SecurePass Kiosk to the printer paired
        12) Step 2b - Connecting SecurePass Kiosk to the printer paired

      6. Auto-Login Configuration

      • In the app settings, enable "Auto-Login" for quicker access.
        13) Step 2b - Connecting SecurePass Kiosk to the printer paired
        14) Step 2b - Connecting SecurePass Kiosk to the printer paired

      7. Screen Brightness and Admin Backlight

      • Adjust the tablet's screen brightness to ensure it's easily readable in various lighting conditions.
        15) Step 4 - Brightness (IMPORTANT)
      • Enable "Admin Backlight" feature for improved QR code scanning in low light.
        16) Step 5 - The new feature Admin backlight
        18) Step 5 - The new feature Admin backlight

      8. Troubleshooting Tips

      • If the printer doesn't print: Check the connection, ensure it's fully charged, and that it has paper.
      • If the printer isn't visible: Restart both devices and attempt re-pairing.